TM 10-8340-225-102-8. FRAME ASSEMBLY-CONT.b.WidthExpansion.(1)Expand the left side of the frame by pulling the locking pins on each of the three left side roof membersand telescoping them out to their full length. They will lock into place automatically at the fully extendedposition.(2) Expand the right side of the frame by releasing the locking pins and telescoping the three right side roofmembers out to the limits of the cross-connecting cables. (If the cables cannot be fully extended make sure thecable is not twisted.)(3) Complete the right side expansion by pushing up at the center (peak) of the roof and completing thetelescoping to the fully extended and locked positions.c.LengthExpansion.(1)Release one set of the buckles holding the bottom (feet) together on the left side of the frame.(2)Release the corresponding set of buckles on the right side of the frame.(3)Disengage the two feet that you have just released.(4)Release the corresponding left and right buckles at the top corners.2-12
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
