TM 10-8340-225-10
2-11.
FABRIC WALL INSTALLATIONS-CONT.
NOTE
For ease of assembly, liners may be attached to walls before mounting.
The liners are attached to the walls by using the hook and pile velcro.
Press together and continue following instructions for the wall assembly.
Also the liners and walls may remain connected when storing.
d.
Wall Sections. Locate the desired wall (assembly instructions are the same for all wall types) and attach each
to the desired side of the tent as follows:
(1)
Unfold the wall, stretch it out and position it so that the velcro pile faces the underside of the roof cap.
(2)
The wall attaches to the inside of the root cap using buckles and velcro. Line the wall up and fasten it to
the roof cap with the buckles. It doesn't matter which order you fasten the buckles, as long as they are lined up.
Take care to keep the velcro apart until buckles are fastened.
(3)
From inside the tent, starting in the center of the wall, line up the velcro strips on wall and roof cap and
press them together. Work from the center toward each end in order to prevent wrinkles in the velcro joints.
2-17
