Figure 3-27—Continued.
(2) Remove the eyebolt (1) and chain (4)
from the arch segment.
(3) Replace the eyebolt and chain assem-
bly in the reverse order of removal.
3-18. Pudin Assemblies
a. Short Purlins.
(1) Remove the applicable end guy assem-
bly, vehicle door, tent end section, and end arch
assembly (para 3-10, 3-11, 3-12).
(2) Unscrew and replace the purlin.
(3) Replace the purlin in the reverse or-
der of removal.
b. Long Purlins.
(1) Disassemble the tent from the inter-
mediate arch.
(2) Unscrew and remove the purlin.
(3) Replace the purlin in the reverse or-
der of removal.
3-19. End Arch Purlin Assembly
a. General. The repair of an end arch
assembly is limited to the replacement
toggle pin and chain and replacement:
adjustment shaft and clevis assembly.
purlin
of the
of the
These
operations may be accomplished with the purlin
installed on the erected tent or after the purlin
has been removed.
b. Removal and Installation.
(1) Untie the ends of the appropriate end
Figure 3-28. Eyebolt and chain assembly.
3 - 3 3
