TM 10-5411-205-13
3-19.
Door Handle Assembly and Latching Mechanism.
This task covers:
a. Inspect
b. Service
c.
Disassemble
d. Assemble
e.
Repair
INITIAL SETUP
Tools
Materials/Parts
General Mechanics Automotive Tool Kit
Sealer (Item 28, Appendix D)
Solid Film Lubricant (Item 22, Appendix D)
Conductive Compound (Item 33,
Appendix D)
NOTE
Except for the length of the latch assembly rods (items 4 and 5,
Figure 3-21), the inner
identical. Maintenance
a . Inspect.
(1) Inspect the door latch
door and outer
procedures are
door handle mechanisms are
the same for both.
assembly for secure mounting and broken or worn parts.
(2) Inspect for ease of operation.
(3) Inspect the door handle for tightness and for worn or damaged parts.
b.
Service. (Figure 3-21) Service of the door latch assembly
door handle (8) and latch arm assemblies (10) with lubricant.
c .
Disassemble. (Figure 3-21)
(1)
(2)
(3)
NOTE
consists of lubricating the
Disassembly procedures are similar for top and bottom sections of
door latch assembly.
Punch out spring pin (1) and remove flat washer (2).
Pull pin (3) and push latch rod assemblies (4 and 5) to the side.
Punch out spring pin (6) attaching the inside handle (7) to outside handle and
shaft (8). Remove inside handle (7).
3-37
