TM 10-5411-205-13
3-17.
Outer Door Assembly (cont).
(5) Door hasp replacement (paragraph 3-22).
a .
Install. (Figure 3-18)
(1)
(2)
(3)
(5)
Coat both sides of each hinge spacer (7) with conductive compound.
Position each spacer (7) and outer door assembly (6) in place and secure each
hinge to shelter with four hex head screws (3), lock washers (4), and nuts (5).
Position door stay assembly channel (2) in place and secure to outer door panel
(6) with three phillips head screws (1).
Apply a continuous bead of sealer around spacer (7) and hinge bracket, and
around head of screws (5).
Figure 3-18. Outer Door Assembly Replacement.
3-32