REMOVAL PROCEDURES (CONT) - TM-10-5411-203-13

REMOVAL PROCEDURES (CONT) - TM-10-5411-203-13_59

PREPARATION FOR MOVEMENT - TM-10-5411-203-13_61

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
55

TM 10-5411-203-13 2-5. REMOVAL PROCEDURES (CONT) b. Removal of Complexinq Kit Passaqewav - Type II, Class A and Class B (ISO Shelter to TEMPER) (Cont) NOTE The next procedure requires two persons on the outside and two persons on the inside of ISO shelter. (13) Replace sidewalk or endwall closeout panel (1) and (2) using the following steps: (a) Remove closeout panel from outside hinged endwall (2) of ISO shelter or retrieve panel from other storage location. (b) Place closeout panel into ISO shelter opening (3) and hold in place. (c) Using flat-tip screwdriver, tighten 12 captive screws in closeout panel. 2-49

Privacy Statement
Press Release
Contact