REMOVAL PROCEDURES (CONT) - TM-10-5411-203-13

REMOVAL PROCEDURES (CONT) - TM-10-5411-203-13_57

REMOVAL PROCEDURES (CONT) - TM-10-5411-203-13_59

TM-10-5411-203-13 Complexing Kit Passage-ways Complexing Kit Passageways Type II Class A Class B Type I Manual
Page Navigation
53

TM 10-5411-203-13 2-5. REMOVAL PROCEDURES (CONT) b. Removal of Complexing Kit Passageway - Type II., Class A and Class B (ISO Shelter to TEMPER) (Cont) WARNING When installing or removing frame assembly, avoid getting fingers caught in hinged joints. Failure to do so may. result in severe injury. NOTE The next procedure requires two persons inside ISO shelter. (10) Remove frame assembly (1) from ISO shelter opening using the following steps: (a) Remove and store tent pins used to stake bottom corners of connector to ground. (b) Loosen strap assemblies located at each inside corner of connector assembly. (c) Unlatch locking pins (2) on sides (3) of frame assembly (1) and insert locking pins into retainer tubes. 2-47

Privacy Statement
Press Release
Contact