TM 10-5411-201-14
T.O. 35E4-178-1
2-21.
(cont)
f.
Remove clamp, loop cable at six places (two with tiedown rings) as
shown .
Replace clamp and tighten clamp nuts.
NOTE
When moving shelter, disassemble storm configuration kit
and cut cable as close to ground as possible.
Discard
cable components.
Retain the two tiedown rings and store
in equipment container.
2-22.
0PERATION DURING BLACKOUT CONDITIONS
NOTE
During blackout condition, enter and leave shelter through
personnel door only.
Do not operate exterior area light.
a.
Activate all. interior lights and check from 25 feet (7.6 meters)
away to ensure no light is visible.
b.
Place blackout override switch to OFF position.
NOTE
Blackout override switch must remain in OFF position
for duration.
2-36