TM 10-5411-201-14
T.O. 35E4-178-1
3-4.
(cont)
1.
Place circuit breaker CB8 to off position.
2.
Disconnect area light assembly connector (1) from power entry panel.
3.
Loosen two wingnuts (2) and lift area light assembly (3) from two
brackets (4) on shelter.
Coil cable on brackets (5) on light post.
INSTALLATION
1.
Position post of area light assembly (3) in two brackets (4) on
shelter and tighten two wingnuts (2) to secure light to shelter.
2.
Connect area light assembly connector (1) to power entry panel.
3.
Place circuit breaker CB8 to on position.
3-5
