TM 10-5411-201-14
T.O. 35E4-178-1
4-16.
(cont)
15.
Disconnect conduit locknut (23) at roof beam area between roof beam
(9) and conduit outlet body (12).
16.
Remove push bar assembly pins (24) at each of three push bar
assemblies.
17.
Remove bolts (25), lockwashers (26), and washers (27) from roof beam
(9) .
18.
Remove roof beam (9) from roof panel.
Fixed Sidewall Wiring
19.
Loosen two captive screws (10) and remove conduit outlet cover (11)
from conduit outlet body (12).
20.
Disconnect wires from four fixed sidewall duplex receptacles (28) in
conduit outlet body (12).
NOTE
Tag wires for reconnection.
21.
Remove screws (29) and duplex covers (30).
22.
Loosen captive screws (31) and remove duplex receptacles (28) from
outlet boxes (32) as far as they will go.
23.
Disconnect wires from rear of duplex receptacles (28) and pull wire
through electrical conduits (33, 34, and 35) to remove.
4-51