TM 10-5411-201-14
T.O. 35E4-178-1
4-16.
(cont)
R E P A I R
1.
Replace damaged wiring.
2.
Corrosion or paint damage.
(Refer to paragraph 4-44)
ASSEMBLY
Roof Beam Assembly
1.
Connect wires (13) to receptacles (7).
(Refer to paragraph 4-47)
2.
Install three insulated connectors (10), two connectors (11), and
electrical cord (12) in roof beam (14).
3.
Install liquid tight connector (8) and locknut (9) in roof beam
(14).
4.
Install three receptacles (7) in roof beam (14) and secure with six
screws (4), nuts (5), and lockwashers (6).
5.
Attach twenty-four wire nuts (l), twenty cable ties (2), and eleven
terminal lugs (3).
INSTALLATION
Fixed Sidewall Wiring
1.
Pull wires through electrical conduits (33, 34, and 35).
2.
Connect wires to rear of duplex receptacles (28).
(Refer to para. 4-47)
4-53
