TM 10-5411-201-14
T.O. 35E4-178-1
4-16. (cont)
REMOVAL
NOTE
This portion of the procedure is applicable to both
models of circuit breaker panels.
Older models
(NQOB) allow individually removing the panel cover
or the panelboard.
Newer model (NQOD) has the
panel cover and panelboard attached and is removed
as a single unit.
1.
Open circuit breaker panel doors (l).
2.
On Model
fingers
3.
On Model
(8) .
NQOB, loosen four captive screws (2) and move four clamp
(3) to the OPEN position.
NQOB, lift panel cover (4) from circuit breaker panelboard
4.
On both models, remove four screws (6) and washers (7) and lift
panelboard (8) from circuit breaker box (5).
5.
Disconnect wires from roof beam (9) in circuit breaker box (5).
NOTE
Tag wires for reconnection.
CHANGE 2
4-49
