TM 10-5411-201-14
T.O. 35E4-178-1
4-16. (cont)
5.
Connect conduit locknuts (21) at roof beam area between roof beam (9)
and each of three fixed roof area ceiling lights (15).
6.
Connect wires from roof beam (9) to rear of receptacle (19). (Refer to
paragraph 4-47.)
7.
Install receptacle (19) in outlet box (20) and tighten two captive
screws (18).
8. Attach duplex receptacle cover (17) to outlet box (20) with screw (16).
9.
10.
Connect wires from roof beam (9) to each of three fixed roof area
ceiling lights (15).
(Refer to paragraph 4-47.)
Attach three fixed roof area ceiling light covers (14) to three fixed
11.
12.
13.
area ceiling lights (15) with nine screws (13).
Connect wires from roof beam (9) to conduit outlet body (12). (Refer
to paragraph 4-47.)
Attach conduit outlet cover (11) to conduit outlet body (12) by
tightening two captive screws (10).
Connect wires from roof beam (9) to circuit breaker box (5). (Refer to
paragraph 4-47.)
CHANGE 2
4-55
