TM 10-5411-200-14
T.O. 35E4-177-1
3-6.
(cont)
INSTALLATION
1.
Rotate
hinged
handle (2) to raise jack until jack lift pins (4) engages
floor sockets (7) and jack hook (3) engages jack support
bracket (5) on hinged sidewall.
2.
Install safety pin (1) through jack support bracket (5) under jack
hook (3).
3.
Rotate handle (2) to raise jack until block is free.
4.
Check proper alignment of positioning marks and proper compression
and placement of seals.
5.
Remove blocks.
6.
Swing handle (2) down and secure in locking clip (6).
3-7
