SIDEWALL CLOSEOUT, ECU INTAKE, AND ECU RETURN PANELS REPLACEMENT (cont)

SIDEWALL CLOSEOUT, ECU INTAKE, AND ECU RETURN PANELS REPLACEMENT (cont) - TM-10-5411-200-14_76

CONTAINER LIFT JACK ASSEMBLY REPLACEMENT - TM-10-5411-200-14_78

TM-10-5411-200-14
Page Navigation
57

TM 10-5411-200-14 T.O. 35E4-177-1 3-8. (cont) ECU Intake Panel Position ECU intake panel (6) in frame opening and secure by tightening four captive screws (5). Sidewall Closeout Panels 1. Position sidewall closeout panel (4) in frame opening bottom first and secure by tightening twelve captive screws (3). 2. Position sidewall closeout panels (2) in frame opening and secure by tightening four captive screws (1). 3. Connect ECU ducts and turn on ECU. (Refer to appropriate shelter system manual.) 3-9. CONTAINER LIFT JACK ASSEMBLY REPLACEMENT This task covers: a. Removal b. Cleaning, Inspection c. Installation INITIAL SETUP Standard tools General mechanics tool kit Personnel - 2 REMOVAL 1. Place sufficient blocks under IS0 fitting to prevent settling of shelter when jack is removed. NOTE Stencil on jack indicates handle rotation to raise or lower jack. 2. . Remove safety pin (1). 3. Rotate handle (2) to lower jack until upper (3) and lower jack attachments (4) will disengage and jack is not supporting shelter. 4. Turn locking handle (5) to rotate insert (6) in IS0 fitting (7), 5. Remove jack. 3-11

Privacy Statement
Press Release
Contact