TM 10-5411-200-14
T.O. 35E4-177-1
3-10.
STORM CONFIGURATION COMPONENTS, SUPPORT BRACES, AND LEVELING JACK
EXTENSIONS REPLACEMENT
This task covers:
a. Removal
b.
Installation
INITIAL SETUP
Standard Tools
References
General mechanics tool kit
para. 2-21 Operation in High Winds
Personnel - 2
REMOVAL
Storm Configuration Components
1.
Cut cable of eight anchor assemblies (1) as close to ground as
possible.
Discard cable components.
2.
Unscrew four tiedown rings (3) from bottom of hinged floor panel
(2) .
Retain the four tiedown rings and store in equipment
container.
NOTE
Drive rod (4), drive head (5), and holding handle
(6) can be removed from equipment container (7).
3-13