TM 10-5411-200-14
T.O. 35E4-177-1
4-11. (cont)
3.
Inspect for and replace if necessary:
a.
Hissing or damaged components.
b. Corrosion or paint damage.
REPAIR
Repair corrosion or paint damage. (Refer to paragraph 4-43)
ASSEMBLY
1.
Position two light support plates
rivets (16). (Refer to paragraph
(17) on light frame (6) and install
4-32)
2.
Position ballast (15) in light frame (6) and secure with nuts (14).
3.
Install electrical cord (8) with liquid tight connector (11) and plug
(12).
4. Attach terminal lug (10) of electrical cord (8) and secure with
installation screw (9).
5.
Connect all wires and secure with wire nuts (7) and remove all tags.
4-30
CHANGE 2
