TM 10-5411-200-14
T.O. 35E4-177-1
4-11. (cont)
1.
Remove three screws (1) and
cover (2).
2. Using multimeter, check for
continuity at fluorescent
lamps, ballast and electrical
cord.
3.
If no continuity is present,
replace defective fluorescent
lamp, ballast or electrical
cord.
DISASSEMBLY
1.
2.
3.
4.
5.
4-28
Remove screws (1) and cover (2) from light frame (6).
CAUTION
When removing end caps, hold safety tube level to
prevent fluorescent tube from accidentally sliding
out and dropping.
Remove split retaining rings (3) from one end of fluorescent lamps
(4).
Remove two fluorescent lamps (4) with light shields (5) by rotating
and sliding out of light frame (6). Remove light shields (5) from
fluorescent lamps (4).
Tag all wires and remove wire nuts (7).
Separate all connecting wires to the ballast (15), electrical cord,
and light frame (6).
CHANGE 2
