TM 10-5410-229-13&P
3-6. LIGHT SET - Contd
(a)
Push in and turn fuseholder cap (1) on male end cap (2) counterclockwise and remove fuseholder cap
(1) and fuse (3) from fuseholder (4)
(b)
Remove spare fuse (5) located in female end cap (6).
(2)
Install Fuse.
(a)
Install spare fuse (5) into fuseholder (4) on male end cap (2) and turn fuseholder cap (1) clockwise.
(b)
Check for proper operation.
b.
Remove and Install Lamp.
(1)
Remove Lamp.
(a)
Pull female end cap (1) off the luminaire (2).
(b)
Disconnect lampholder (3) by depressing, retainer connector (4).
(c)
Pull lamp (5) out of luminaire (2).
(
2)
Install Lamp.
(a
Push new lamp (5) through retainer clips (6) into luminaire (2), keeping the connector pins (7) in a
vertical position.
3-7