TM 10-5410-229-13&P
TABLE 3-1. OPERATOR TROUBLESHOOTING
CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
LUMINAIRES DO NOT LIGHT.
Step 1.
Check power source.
Select proper power source (110V AC 50/60 HZ)
Step 2.
Check to make sure all electrical connectors are properly connected.
Connect electrical connectors.
Step 3.
Check for bad fuse (glass enclosed wire will be broken/burnt).
Replace fuse if necessary as described in paragraph 3-6.
Step 4.
Check for burnt-out fluorescent lamp (lamp will be gray/black).
Replace lamp as described in paragraph
3-4
