TM 10-5410-229-13&P
Section III. OPERATOR’S MAINTENANCE PROCEDURES
3-4. INSPECTION. Perform inspection as described in Chapter 2, Section II, PMCS. Report defects on DA Form 2404.
3-5. CLEANING. Clean all MCPS fabric components with a brush (Item 2, Appendix F) and mild soapy water (Item 1,
Appendix F). Let fabric components air dry.
3-6. REPAIR LIGHT SET, TYPE II.
This task covers:
a. Remove and Install Fuse
b. Remove and Install Lamp
INITIAL SETUP
Tools:
None
Materials/Parts:
Fuse
Lamp
Equipment Condition:
Luminaire turned off and disconnected
a.
Remove and Install Fuse.
WARNING
Turn off power before replacing fuse or lamp. Lethal voltage is present
when power is applied to light set. Electrical shock and death may result
from failure to heed this warning.
(1) Remove Fuse.
3-6
