TM 10-5410-229-13&P
2-6. ASSEMBLY AND INSTALLATION INSTRUCTIONS - Cont’d
(1)
Release the buckles (1) on the roof cap (2) and refasten them around the left hand (3) and right hand (4)
purlins, so that the straps (5) hold the sides of the roof cap (2) centered over the frame.
(2)
Pull straps (5) tight to eliminate any sag in the roof cap (2). Loosen the tent lines on the roof cap.
f.
Liqht Set installation. Install the light set before raising the tent to its full height. This will avoid unsafe working
conditions resulting from attempts to install the luminaires at full tent height. Install the light set as follows:
2-22
