TM 10-5410-229-13&P
2-6. ASSEMBLY AND INSTALLATION INSTRUCTIONS - Cont’d
through the "D" ring (4). Press the hook and pile fastener to secure.
(3)
Repeat above steps (1) and (2) for second luminaire, ensuring that male and female electrical connectors are
facing each other.
(4)
Connect the female electrical connector (5) of one luminaire to the male electrical connector (6) of the other
luminaire. (A maximum of 12 luminaires may be joined.)
(5)
Leave a male electrical connector (6) available for connection to the power source.
g.
Extending the frame to its full height. Before attaching the walls, it is necessary to extend the tent frame to a
convenient working height. Proceed as follows: 2-24
CAUTION
When handling tent frame do not twist or turn. Damage to frame can result.
2-24
