TM 10-5410-229-13&P
2-6. ASSEMBLY AND INSTALLATION INSTRUCTIONS - Cont’d
NOTE
If the connector (9) does not fit in easily, do not force it. Pull the pin and
wiggle the connector (9.) into the socket (11).
(8)
Connect the left hand (1) and right hand (2) purlins on the center wall frame assembly (3) to the sockets (11)
on the end wall corner fittings (12) of the end wall frame assemblies (7). Lock all four purlins in the same
manner.
NOTE
Do not raise the legs until the roof cap fabric is installed.
c.
Roof Cap installation. Install the roof cap over the frame as follows:
2-18
