TM 10-5410-224-14
(10) Removal and replacement of personnel
(25) to detach end jack support plate (26).
door-mounted jack support hardware (fig. 3-21).
(c) Replace each jack support plate (26) by
To remove and replace door-mounted jack support
securing to door with two screws (24) and washers
hardware, proceed as follows:
(25).
(a) Remove five screws (20) and washers
(d) Replace each jack support angle (37) by
(21) to detach each jack support angle (22).
securing to door with four screws (34) and washers
(b) Remove two screws (24) and washers
(35).
1. Rivet (22)
8. Door assembly
15. Rivet (6)
22. Angle (2)
2. Fastener (5)
9. Rivet (25)
16. Block (2)
23. Insert (8)
3. Screw (2)
10. Screw (2)
17. Rivet (2)
24. Screw (8)
4. Washer (2)
11. Washer (2)
18. Rivet (20)
25. Washer (8)
5. Washer (2)
12. Hinge
19. Strip
26. Plate (4)
6. Spacer
13. Insert (2)
20. Screw (8)
27. Insert (8)
7. Insert (2)
14. Seal
21. Washer (8)
28. Personnel door panel assembly
