TM 10-5410-224-14
(c) Remove air filter (2) from filter retainer
(11) Removal and replacement of door vent air
(1) and install new air filter (2) onto filter retainer
filter (fig. 3-22). To remove and replace personnel
(1).
cargo door vent air falter, proceed as follows:
(d) Position air filter (2) and louver (17) in
(a) Loosen screws (11) in each of six lugs
vent opening and use six lugs (13) to secure them.
(13) around vent so that lugs can be swung away
to release louver (17).
(b) Remove louver (17) and air filter (2)
from vent opening.
10. Nut (2)
1. Retainer
11. Screw (6)
2. Filter
12. Cap (6)
3. Screw
13. Lug (3)
4. Bolt (2)
14. Insert (6)
5. Washer (2)
15. Hinge
6. Spring
16. Door
7. Rivet (21)
17. Louver
8. Angle
9. Angle
