TM 9-4931-374-13&P
13
CLAMPING NUT (1).
a. Rotate until notch (23) is alined with
boss (24) on lower half of body (11).
b. Push into position by sliding over boss
(24).
14
TWO CABLE CLAMP SCREWS (18).
Tighten evenly.
16
PLUG CONNECTOR (26).
Mark
designation "PI" on exterior using marking
ink (item 13, app D).
17
BAND (27).
a. Slip on cable (2).
b. Position at rear of plug connector (26)
and shrink in place using heat gun.
15
GASKET (25). Install.
3-303
