TM 9-4931-374-13&P
3-38. CABLE ADAPTER ASSEMBLY--MAINTENANCE INSTRUCTIONS (cont)
TEST PROCEDURES
Table 3-8. Wire Locations
NOTE
Correct wiring of the cable
NOTE
adapter assembly should be
Use this table to place leads
checked with an ohmmeter
on correct contacts.
(electrical continuity test).
1
OHMMETER LEAD #1 (1). Place on a
Lead #1 on
Lead #2 on
contact (2) on female connector (3).
contact
contact
on
on
2
OHMMETER LEAD #2 (4). Place on
female connector
plug connector
appropriate contact (5) on plug connector
(6) according to table 3-8.
A
1
B
2
C
3
G
4
N
4
3
OHMMETER (7). Should read approximately zero for each of the five
readings (on contact combinations).
3-308
