TM 9-4931-374-13&P
INSTALLATION
WARNING
Do not connect or disconnect cable adapter assembly
when shop set is energized.
1
PLUG CONNECTOR (1). Install on mating connector (2) on power
distribution panel.
2
TERMINAL LUG (3).
a. Attach wire of grounding rod (4).
b. Tighten.
3
GROUNDING ROD (4). Push into ground near plug connector (1).
CAUTION
Remove dust covers just prior
to connection to protect
connectors from dirt, dust,
etc.
4
DUST COVER (5). Remove from
electrical plug connector (male) (6) on
120/208V cable assembly (7).
5
DUST COVER (8). Remove from female
connector (9) on cable adapter assembly
(10).
3-309
