TM 9-4931-374-13&P
35
THREE SCREWS (42). Install.
36
SPACER (32) AND GLAND (31). Slide
into position at rear of rear connector
33
DUST COVER (41) AND SCREW (42).
housing (33).
34
CABLE ASSEMBLY (43) AND SCREW
Assemble.
(42). Assemble.
37
GRIP (30). Push into position.
38
GLAND NUT (29).
a. Slide toward rear connector housing
(33).
CAUTION
The gland nut has left hand
threads
and
should
be
tightened by turning in the
opposite direction from that
used to tighten standard
right-hand threaded nuts.
b. Tighten to a torque level of 35 to 40 lb-ft
(47.25 to 54 N-m).
39
FEMALE CONNECTOR (44).
Mark
c. Retorque
to
same
level
after
designation "P2" on exterior using marking
approximately 12 hours.
ink (item 13, app D).
3-307
