TM 9-2330-390-14&P
4-60.
SPIDER ASSEMBLY REPLACEMENT (Con’t).
3.
Remove wedge assembly (10) by pulling it straight out of plunger housing (3).
4.
Remove four capscrews (13), lockwashers (12), and two dust shields (11) from spider (18). Discard
lo&washers.
NOTE
On front dolly, spider is mounted to steering knuckle spindle.
5.
Remove eight nuts (16), lockwashers (17), sockethead capscrews (10), and spider (18) from axle spindle (15).
Discard lockwashers.
6.
7.
Remove four plugs (14) from two dust shields (11).
Remove two nuts (9), bolts (6), lockwashers (7), and hold-down clips (8) from spider (18). Discard
lockwashers.
4-132
