TM 9-2330-390-14&P
2-34. REDUNDANT POWER OPERATION (Con’t).
c.
On powered (functioning) dolly half, disconnect quick disconnect coupler (3) from quick disconnect
nipple (6).
NOTE
if quick disconnects on redundant power kit hoses cannot be connected, notify Unit
Maintenance.
d.
On powered dolly half, connect redundant power kit hose (5) (both ends have quick disconnect
couplers) to quick disconnect nipple (6). Connect redundant power kit hose (4) (both ends have quick disconnect
nipples) to quick disconnect coupler (3).
e.
On nonpowered (nonfunctioning) dolly half, remove dust cap (8) from dust plug (9). Disconnect quick
disconnect nipple (10) from quick disconnect coupler (11) at hydraulic reservoir (7).
f.
On nonpowered dolly half, install dust cap (8) in quick disconnect coupler (11). Connect redundant
power kit hose (5) (both ends have quick disconnect couplers) to quick disconnect nipple (10).
2-151
