TM 9-2330-390-14&P
2-12.
ATTACHING FRONT AND REAR DOLLIES TO SHELTER (SHELTER ON GROUND)
(SIDE LIFT OPERATION) (Cont).
While in maneuvering position, DO NOT operate positioning cylinders lever. Failure to
follow this warning may cause bottom beam to lower to the ground, causing serious
injury to personnel.
b.
Move each dolly half into position at centerline of side of shelter (6). Place within 6 in. (15 cm) of shelter.
c.
Remove each dolly half from maneuvering position (see paragraph 2-21c).
d.
At front and rear, remove two detent pins (3) and telescopic brace (1) from top beam (2) and drawbar (8).
Set telescopic braces aside.
2-85