TM 9-2330-390-1 4&P
2-9. ATTACHING FRONT AND REAR DOLLIES TO SHELTER.
· All personnel must use caution when standing near front and rear dollies and shelter
during attaching operations. Failure to follow this warning may cause serious injury
or death to personnel.
· Use extreme caution when using ladder. Have an assistant hold ladder to ensure that
It is stable. Failure to follow this warning may cause serious Injury to personnel.
a.
At front and rear, pull down on two lift cylinder levers (1) to separate front and rear dollies approximately
12 in. (30 cm). Push up on lift cylinder levers to bring top and bottom beams (2 and 5) back to the vertical position.
b.
At front and rear top beams (2), remove two detent pins (3) and rotate top hooks (4) 180° to shelter
engagement position. Install detent pins.
c.
Place each dolly half in maneuvering position (see paragraph 2-21b).
2-59
