TM 9-2330-275-14&P
2-11. ATTACHING DOLLY SET TO SHELTER (Con’t).
NOTE
Perform stops 19 and 20 for the M840
to prevent each suspension bar from
rotating forward.
(19) Remove two bolts (37) from each~suspension
bar (25) to separate front dolly (4) and rear dolly (1).
(20) Remove two lockpins (40) and quick-release
pins (38) and disconnect two support struts (22) from each
suspension bar (25). Compress lifting-leveling jacks (24) until
holes in suspension bar aline with brackets (39) on support struts
(22). Install two quick-release pins (38) and Iockpins (40).
(21) Lock steering on front axle (41) by installing
lanyard rod (42) in front axle connecting link (43).
NOTE
For the M832 (SN J089-001 thru 159
and JO17-160 thru 350), perform steps
22 through 30 and skip steps 31
through 47. For all other models, skip
steps 22 through 30 and perform steps
31 through 47. Rear dolly must be in
lowered position with lockout feature
engaged.
(22) Lower caster wheels (44) by turning caster
wheel bearing post (45) clockwise until suspension bar (25) is
slightly off ground.
2-20
