2-11. ATTACHING DOLLY SET TO SHELTER (Con’t).
(39) Remove quick-release pin (50) from connecting
link and lower drawbar (6) to ground.
NOTE
Perform steps 40 through 44 to attach positioning bar to rear dolly.
(40) Remove pin (52) from positioning bar (53).
(41) Collapse length of positioning bar (53) and remove.
(42) Extend length of positioning bar (53), and install pin (52) through crosshole.
(43) Install positioning bar (53) on tube (51) at center of rear dolly (l). Rotate positioning bar (53) to
lock firmly in place.
2-25
