TM 9-2330-275-14&P
2-11.
ATTACHING
Perform
DOLLY SET TO SHELTER (Con’t).
NOTE
step 16 for the M832 to
prevent each suspension bar from
rotating forward.
(16) Compress liftin9-leveling jacks (24) until
two wire lanyards (26) on each suspension bar (25) aline
with lower pins (27) on support struts (22). Install wire
lanyard (26) over lower pin (27). Dolly set is now lowered
and in lockout position.
(17) For the M832, remove two bolts (31 ) and retaining blocks (29) from suspension bars (28 and 30).
Stow retaining blocks (29) in toolbox.
(18) For the M832, remove two bolts (32), Iockwashers (36), coupling clamps (35), and~coupling clamp
nuts (tee-blocks) (34) from suspension bar mounting tongues (33) to separate front dolly (4) and rear dolly (l).
2-19
