TM 9-2330-275-14&P
2-11. ATTACHING DOLLY SET TO SHELTER (Con’t).
(12)
(13)
(14)
(15)
Remove quick-release pin (18) and lower drawbar (6) to ground.
Remove safety pin (16), pin (17), and drawbar (8) from front dolly (4).
Install drawbar (6) to rear dolly (1) with pin (17). Install safety pin (16).
Raise drawbar (6) and install quick-release pin (18).
(16)
(17)
Release handbrakes (para 2-2).
Raise drawbar (6) and position rear dolly (1) so mounting tongues (13) are installed in brackets (21)
at bottom of shelter (19).
(18) Lower drawbar (6) to lift suspension bar (10), ensuring that mounting tongues (13) remain fully
installed in backets (21) of shelter (19),
(19) using two personnel, operate two lifting-leveling jack handles (11) clockwise at same time until
upper surface of each suspension bar (10) rests against shelter (1 9).
(20)
bolts.
(21)
(22)
(23)
(24)
Install two bolts (15) to secure suspension bar (10) to shelter comer brackets (20). Do not fully tighten
Apply handbrakes (para 2-2).
Remove quick-release pin (18) and lower drawbar (6) to ground.
Remove safety pin (16), pin (17) and drawbar (6) from rear dolly (1).
install drawbar (6) to front dolly (4) with pin (17). Install safety pin (16).
2-14
