TM 10-8340-243-13&P
UNIT MAINTENANCE
MAPBOARD ASSEMBLY
REPAIR, REPLACE
INITIAL SETUP
Tools and Special Tools
Personnel Required
Tool Kit, General Mechanic's
One
(WP 0046, Item 7)
Materials/Parts
References
Locator Cylinder Assembly (WP 0035, Item 4)
Overlay, Rigid (WP 0035, Item 16)
Overlay, Rollable (WP 0035, Item 17)
Equipment Condition
Mapboards separated (WP 0005)
REPAIR
Repair Mapboard Assembly
(Figure 1, Item 3).
2. Remove locator cylinder assembly (Figure 1, Item 2).
3. Insert replacement locator cylinder assembly (Figure 1, Item 2) through rollable overlay (Figure 1,
4. Install screw (Figure 1, Item 1) holding locator cylinder assembly (Figure 1, Item 2) to mapboard
panel (Figure 1, Item 3).
5. Move cylinder locator (Figure 1, Item 2) into horizontal position.
6. Remove rollable (Figure 1, Item 4) and/or rigid (Figure 1, Item 5) overlays.
7. Place replacement rigid (Figure 1, Item 5) and/or rollable (Figure 1, Item 4) overlays over cylinder
locator (Figure 1, Item 2).
8. Move cylinder locator (Figure 1, Item 2) into vertical position.
0015-1
