TM 10-8340-243-13&P
0014
REPLACE
Replace Frame Lower Leg Assemblies
WARNING
When handling tent frame, do not grasp the frame
near the frame joints. Failure to do so can result in
personnel injury to hands and fingers. Failure to
follow tie down and staking instructions may result in
possible injury to personnel and damage to
equipment.
1. Remove lower leg assembly (Figure 2, Item 1) by pulling ring (Figure 2, Item 2) on detent assembly
2. Insert replacement lower leg assembly (Figure 2, Item 1) into upper leg assembly (Figure 2, Item 4),
and lock with detent (Figure 2, Item 3) to the desired height.
4
3
1
2
END OF TASK
