TM 10-8340-243-13&P
0014
Replace Cable Assemblies
WARNING
When handling tent frame, do not grasp the frame near the frame joints. Failure
to do so can result in personnel injury to hands and fingers. Failure to follow tie
down and staking instructions may result in possible injury to personnel and
damage to equipment.
1. Remove bolt (Figure 4, Item 1) and locknut (Figure 4, Item 2) securing cable assembly (Figure 4,
2. Pull cable assembly (Figure 4, Item 3) out of cord (Figure 4, Item 5) loop.
3. If removing cord (Figure 4, Item 5), slide cord off purlin (Figure 4, Item 6).
4. Insert cable assembly (Figure 4, Item 3) through cord (Figure 4, Item 5) loop.
5. Align swaged end of cable assembly (Figure 4, Item 3) with hole in upper leg assembly fitting
6. If replacing cord, slide cord (Figure 4, Item 5) loop over purlin (Figure 4, Item 6).
2
6
4
1
5
3
3
5
END OF TASK
END OF WORK PACKAGE
