ARMY TM 10-8340-224-13
AIR FORCE TO 35E5–6-1
NAVY NAVFAC–P–337.A
5-15. TEST AND REPAIR LIGHT SET, Type I (CONT).
f. Remove and Install Male Cable Assembly.
(1) Remove Male Cable Assembly.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
Remove fuse cap (1) and fuse (2).
Remove molded male and female end caps (3,4) from
luminaire (5).
Disconnect lampholder (6) by depressing retainer
connector (7).
Pull the lens/screen (8) off the extrusion assembly
(9) to expose the ballast (10).
Remove splices (11) and disconnect black (12) and
white (13) wires of the male power cord (14).
Disconnect the male power cord ground wire (15) from
the ground post (16).
Pull male power cord (14) out of the molded end cap
(3) and bushing (17).
5-22
