ARMY TM 10-8340-224-13
AIR FORCE TO 35E5-6-1
NAVY NAVFAC-P-337.A
Section V. Preparation for Storage or Shipment
4-12. PREPARATION FOR STORAGE. To prepare the TEMPER equipment
for storage, clean and dry the fabric sections and other
components as described in paragraph 3–6. Perform operator PMCS
as specified in Table 2–3.
Pack the fabric and frame assemblies into the tent cover and
frame sections cover assembly. Place bags onto a wooden pallet
and store in a building, shed, or other dry place. Store the
light set in its storage container.
Special Instructions for Administrative Storaqe.
Placement of equipment in administrative storage should be for
short periods of time when a shortage of maintenance resources
exist. Items should be in mission readiness within 24 hours or
within the time factors as determined by the directing authority.
Appropriate maintenance records will be kept during storage.
Before placing equipment in administrative storage, current
maintenance services and Equipment Serviceability Criteria (ESC)
evaluations should be completed, shortcomings and deficiencies
should be corrected, and all Modification Work Orders (MWOs)
should be applied.
Storage site selection. Inside storage is preferred for items
selected for administrative storage. If inside storage is not
available trucks, vans, conex or other containers may be used.
4-13. PRESERVATION. If the TEMPER components are to be stored
without regular PMCS being performed, consult TM 38–230-2 for
preservation requirements.
4-14. PREPARATION FOR SHIPMENT. Prepare the TEMPER for shipment
by packing components into the wooden crate, using the original
packing material, in which they were received. Strap crates onto
wooden pallet.
4-11/(4-12 blank)
