TM 10-7360-208-13&P
Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
4-1.
COMMON TOOLS AND EQUIPMENT. Refer to your unit's Modified Table of Organization and Equipment,
(MTOE) to determine the common tools and equipment authorized and available at your unit.
4-2.
SPECIAL TOOLS, TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT
EQUIPMENT. The special tools required to maintain the MFK are listed in Appendix F, and Section III, Appendix B. No
TMDE, or special support equipment is required at the unit level to maintain the MFK.
4-3.
REPAIR PARTS. Repair parts authorized for unit maintenance are listed in Appendix F.
Section Il. SERVICE UPON RECEIPT
4-4.
UNPACKING. The MFK, with components, will be packaged in wooden crates strapped to wooden pallets.
Check crates for indication of damage. Report any damage to your supervisor.
CAUTION
Unpack components carefully. Improper or hasty handling may result in damage to the
MFK components and accessories.
a. Procedure. Unpack the equipment in the following sequence:
(1)
Position crate or carton to be unpacked with the top facing up.
(2)
Cut and remove retaining straps. Do not cut, rip, or otherwise damage packing material.
(3)
Open the carton, remove the corrugated padding material, and set it aside.
(4)
Lift the equipment from the carton.
b. Shipping Material. Save the shipping carton and padding material for reuse.
4-5. CHECKING UNPACKED EQUIPMENT.
a. Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report the
damage on SF Form 364, Report of Discrepancy.
b. Check the equipment against the packing slip to see if the shipment is complete. Report all discrepancies in
accordance with the instructions of DA PAM 738-750.
c. Check to see whether the equipment has been modified.
4-2
