TM 10-7360-208-13&P
2-6. ASSEMBLY AND PREPARATION FOR USE (CONT).
c. Oven Assembly. Assemble each oven assembly (1) as follows:
WARNING
Serious injury could occur if heavy equipment is
moved/lifted without sufficient personnel to do the
job. Use proper physical lifting procedures or use
a suitable lifting device or dolly. Wear safety
shoes, gloves and other suitable protective
clothing.
(1) Move each oven assembly (1), burner rack (2) with M2 burner unit (3) installed and base rack (4) to the oven
assembly location (Figure 2-1).
(2) Place the base rack (4) in position; place the M2 burner unit (3) installed in its burner rack (2), on top of the
base rack (4), note the arrow markings (5) on the oven assembly (1) and place the oven assembly (1) on top of the
burner rack (2).
(3) Place two vent caps (6) in the openings on top of the oven assembly (1).
2-10
