TM 10-7360-208-13&P Table 2-2.  Operator’s Preventive Maintenance Checks and Services B-Before Operation   D-During Operation A-After Operation B D A 7 Heater Tank Inspect heater tank assembly for Heater cabinet is Assembly broken, loose or missing hardware, physically damaged or bent members, broken welds and leaks.  Water drain leaking drain valve.  Check that valve leaks.  Warning warning and instruction plates are plate missing or properly mounted and legible. illegible. 8 Cooking Pot Inspect the cooking pot cradle Cradle assembly for bent members, or Assembly broken welds.  Check that warning plate is properly mounted and legible.  Refer to item 5 for racks. 9 M2 Burner Unit Perform PMCS IAW TM 10-7360-204-13&P. 10 Mounted Can Check mounted can opener for Opener operation, damage, and dull blades. 11 Work Table Check to ensure tables are level and secure.  Check for broken welds, loose or missing hardware. 12 Liquid Inspect liquid dispenser for damage Dispenser or missing hardware.  Check for leaks. Inspect operation of faucet assembly, spout assembly, cap vent and lid assembly.  Insure gasket on lid assembly forms a good seal. 13 Food Check for damage to gasket, latches Container and hinges.  Check door for proper closing. 14 Storage Inspect for dents, holes and broken Cabinet welds or damaged frame.  Inspect recessed doors for proper opening and closing.  Check handles for firmness. Check that catch holds door firmly. 2-5 INTERVAL ITEM NO. Item To Be Inspected Equipment  Not Ready/Available If: Procedures