TM 10-7310-281-13&P
MODERN BURNER UNIT (MBU)
0018 00
SERVICE UPON RECEIPT
0018 00-1
UNPACKING
The initial fielding of the MBU and its associated components, including equipment modifications to the MKT to
accommodate the system, will be accomplished using contractor resources. Subsequent shipments containing
replacement items will be individually packaged. None of these components require any kind of de-processing.
They should be removed from their packing containers and used as outlined in WP 0005.
INSPECTION
Inspect the shipment, noting any damage sustained during shipping or handling. Report all discrepancies in
accordance with DA PAM 738-750. Unpack the box and inventory its contents against the packing slip to see if
the shipment is complete. Also inspect the equipment for damage incurred during shipment. If the equipment has
been damaged, report the damage on SF 361, Transportation Discrepancy Report.
FOOD SERVICE SYSTEM EQUIPMENT MODIFICATION
The adaptation of the MBU to the field feeding systems indicated above does not require modification of any
equipment, except the Mobile Kitchen Trailer (MKT). Three modifications to that system are necessary. All three
will be applied by the fielding contractor prior to issue of the MBU equipment to the using unit. These
modifications involve the installation various components as described in the sections that follow.
Figure 4-1 Overview of MKT Modification
This section of cable is underneath the
deck of the MKT.
The 50 foot 110Vac extension cable is fed
through the floor at this location.
Griddle
MBU
MBU
MBU
MBU
MBU
MBU
