TM-10-5411-235-13
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INTRODUCTION.
Purpose of PMCS Table. The purpose of this table is to list all the scheduled maintenance
actions required to keep the LMS enclosure in good operating condition. Doing the
scheduled maintenance actions will reduce the chances of equipment breakdown.
Item Number Column. This column numbers the PMCS procedures in the order they should
be done. These numbers will be used as a source of item numbers for the "Item Number"
column on DA Form 2404, Equipment Inspection and Maintenance Worksheet, in recording
the results of PMCS.
Interval Column. This column tells you when and how often to do a certain check or service.
More than one interval may be placed in a column that would mean you would do that check
or service at each of these intervals.
Item to be Inspected Column. This column lists the specific items to be worked on such as
"DOOR SEAL".
Procedures Column.
This column tells you how to perform the required checks and
services.
Not Fully Mission Capable If Column. This column tells you when the specific item is to be
considered not mission capable.
Table 1. Unit Preventive Maintenance Checks and Procedures
Item
Interval
Item to be
Procedures
Not Mission Capable
Number
Inspected
if:
1
Monthly
Inspect Shelter
Inspect Shelter
Lifting Rings
lifting rings for
excessive wear or
loose/missing
mounting hardware
2*
Semi-Annually
Shelter exterior
Inspect the Shelter
Walls, floor, or ceiling
and interior
exterior and interior
panels have punctures
walls, floor, and
ceiling panels for
evidence of
punctures and
delamination
3*
Semi-Annually
Weather and EMI
Inspect condition of
If weather and/or EMI
gaskets
weather and EMI
gaskets are damaged
gaskets for
serviceability
0011 00-1
