TM 10-5411-203-13
2-4.
INSTALLATION AND PREPARATION FOR USE (CONT)
a.
Installing Complexing Kit Passageway - Type I (ISO Shelter to ISO Shelter) (Cont)
WARNING
The Complexing Kit Passageway components include two ramps and a stairway. The
ramps weigh 145 pounds (65.77 kg) and 195 pounds (88.45 kg) respectively, and the
stairway (complete assembly) weighs approximately 70 pounds (31.75 kg). Four
personnel are required to handle each of these components. Attempting to lift or carry
any one of them by yourself could result in serious injury or damage to the equipment.
CAUTION
When cutting tie-down straps to unpack Complexing Kit Passageway, be sure not to cut
canvas Damage to equipment may result.
(3) Unpack Complexing Kit Passageway - Type I (1). Carefully check all parts. Report any discrepancies to
your supervisor.
(4) Place ramp inside one ISO shelter for later placement.
(5) Align Complexing Kit Passageway (2) with ISO shelter openings. Make sure weather barriers (3) are on top.
2-9
