TM 10-5411-203-13
2-4.
INSTALLATION AND PREPARATION FOR USE (CONT)
a.
Installing Complexing Kit Passageway - Type I (ISO Shelter to ISO Shelter) (Cont)
NOTE
The next procedure requires two persons on the outside and two persons on the inside of
ISO shelter.
(2) Remove chosen sidewall or endwall closeout panels (1) from both ISO shelters (2) using the following steps:
(a) Using wide flat-tip screwdriver, loosen 12 captive screws on closeout panel (1).
(b) Remove closeout panel (1) and stow on outside hinged sidewall (3) or other location while not in use.
(c) Repeat steps (a) and (b) for closeout panel (1) on second ISO shelter
2-8
